manualshive.com logo in svg

YASKAWA VIPA System SLIO, Руководство пользователя

Поделиться
Скачать
YASKAWA VIPA System SLIO Скачать руководство пользователя страница 52

L/A1

L/A2

 green

Description

The corresponding Ethernet PG/OP channel is physically connected to the Ethernet.

The corresponding Ethernet PG/OP channel is not physically connected to the Ethernet.

The corresponding Ethernet PG/OP channel indicates Ethernet activity, here the LED flickers.

Dependent on the mode of operation the LEDs show information about the state of oper-

ation of the PROFIBUS part according to the following pattern:

DE

 green

BF1

 red

Description

Master operation

Master has no project, this means the interface is deactivated respectively the master configured without

slaves with no errors.

 2Hz

CPU is in STOP state, the master is in "clear" state. All the slaves are in DE (data exchange) and the

outputs of the slaves are disabled.

CPU is in RUN state, the master is in "operate" state. All the slaves are in DE. The outputs are enabled.

 2Hz

CPU is in RUN state, at least 1 slave is missing and at least 1 slave is in DE.

 2Hz

 2Hz

CPU is in STOP state, the master is in "clear" state. At least 1 slave is missing and at least 1 slave is in

DE.

PROFIBUS is interrupted (no communication possible).

 2Hz

At least 1 slave is missing and no slave is in DE.

X

 2Hz

At least 1 slave is not in DE.

Slave operation

Slave has no configuration.

There is a bus error.

 2Hz

Slave exchanges data with the master.

Slave CPU is in state STOP.

Slave exchanges data with the master.

Slave CPU is in state RUN.

not relevant: X

LEDs Ethernet PG/OP

channel

LEDs PROFIBUS

VIPA System SLIO

Hardware description

Structure > LEDs

HB300 | CPU | 013-CCF0R00 | en | 19-30

 

52

Содержание VIPA System SLIO





























































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды