1.
Switch to the
‘Device view’
.
2.
Select the PROFIBUS interface of your CPU 314C-2 PN/DP (314-6EH04-0AB0
V3.3) and select
‘Context menu
è
Properties’
.
ð
The
‘Properties’
dialog is shown.
3.
On the
‘General’
tab, click
‘MPI Address’
.
ð
The dialog for the MPI address appears.
4.
Set the
‘Interface type’
to "PROFIBUS".
5.
Connect to PROFIBUS and preset an address (preferably 2).
6.
Switch at
‘Operating mode’
to "DP master".
ð
A master system is inserted.
Now the project engineering of your PROFIBUS DP master is finished. Please link up
now your DP slaves with periphery to your DP master.
1.
For the project engineering of PROFIBUS DP slaves you search the concerning
PROFIBUS DP slave in the hardware catalog and drag&drop it in the subnet of your
master.
2.
Assign a valid PROFIBUS address to the DP slave.
3.
Link up the modules of your DP slave system in the plugged sequence and add the
addresses that should be used by the modules.
4.
If needed, parametrize the modules.
Proceeding
VIPA System SLIO
Configuration with TIA Portal
TIA Portal - Option: Deployment PROFIBUS communication > Deployment as PROFIBUS DP master
HB300 | CPU | 013-CCF0R00 | en | 19-30
317