Yamaha WR450F(T), Руководство по эксплуатации для владельца

Страница: 598 / 758

5 - 44
CHAS
HANDLEBAR
9. Install:
• “ENGINE STOP” button
1
• Clutch lever holder
2
• Bolt (clutch lever holder)
3
• Hot starter lever holder
4
• Bolt (hot starter lever holder)
5
• Clamp
6
NOTE:
• The “ENGINE STOP” button, clutch lever
holder and clamp should be installed accord-
ing to the dimensions shown.
• Pass the “ENGINE STOP” button lead in the
middle of the clutch lever holder.
T
R
.
.
4 Nm (0.4 m · kg, 2.9 ft · lb)
T
R .
.
4 Nm (0.4 m · kg, 2.9 ft · lb)
10. Install:
• Clutch cable
1
• Hot starter cable
2
NOTE:
Apply the lithium soap base grease on the
clutch cable end and hot starter cable end.
11. Adjust:
• Clutch lever free play
Refer to “CLUTCH ADJUSTMENT” sec-
tion in the CHAPTER 3.
• Hot starter lever free play
Refer to “HOT STARTER LEVER
ADJUSTMENT” section in the CHAPTER
3.
12. Fasten the hot starter cable
1
and clutch
cable
2
with a clamp
3
.
1
2
3