Xante Accel a Writer 812, Руководство пользователя

Страница: 97 / 312

___________________________________________ PC Setup 4-17
1. Make sure your printer and host are powered on and you are at
the DOS prompt.
2. Go to the PS directory on the XANTÉ Utilities PC disk where
STARTPG.OFF and STARTPG.ON are located. (Or, if you
loaded the files on your system, go there.)
3. Send either the STARTPG.OFF or STARTPG.ON file using
the following procedure to disable or enable the start-up page.
Note: Substitute either STARTPG.OFF or STARTPG.ON
for <filename> in the command line. Also, if you use a
port other than LPT1 or COM1, substitute the 1 in the
port name with the number of the port used.
Type either
COPY <filename> LPT1
↵
to download the desired file to the printer over the parallel
interface, or by typing
COPY <filename> COM1
↵
to download the desired file to the printer over the serial
interface.
After the file downloads, the following message appears.
1 FILE(S) COPIED
◊ ◊ ◊