Xante Accel a Writer 812, Руководство пользователя

Страница: 117 / 312

_______________________________________ Configuration 5-19
The Data Bits Menu
The Data Bits menu, RS232:DATA BITS, allows you to select either
7 or 8 data bits. The factory default is 8.
To change this numeric value once you are in this menu, use the Test
←
key to lower the value or use the Menu
→
key to raise the value
to the desired amount; then, press the Enter
↓
key to confirm the
selection.
The Stop Bits Menu
The Stop Bits menu, RS232:STOP BITS, allows you to select either
1 or 2 stop bits. The factory default is 1.
To change this numeric value once you are in this menu, use the Test
←
key to lower the value or use the Menu
→
key to raise the value
to the desired amount; then, press the Enter
↓
key to confirm the
selection.
The Parallel, LocalTalk,
EtherTalk, and LinePrinter Menus
Use the Parallel and LocalTalk menus (I/F:Parallel and I/F:LTALK)
to configure the parallel and LocalTalk interfaces. Use the EtherTalk
and LinePrinter menus (I/F: ETALK and I/F:LPR) to configure the
Ethernet interface. Each of these four menus includes two submenus
which work in the same manner. The submenus are
• ENABLE
• MODE