Xante Accel a Writer 812, Руководство пользователя

Страница: 143 / 312

6-18 Routine Operations bb __________________________________
Printing Labels
Always print labels from the fold down tray. When you run labels,
keep the following in mind:
• Load label sheets print side up in the fold down tray.
• Make sure label stock falls within the guidelines for the
fold down tray listed in “Selecting Media” earlier in this
chapter.
• Label stock should range from 0.0039" to 0.0045" (0.127
mm to 0.178 mm) in thickness.
• Label stock should be letter or A4 in size.
• Only use quality label stock which can handle a
temperature of 392˚ F (200˚ C).
• If you run preprinted labels, make sure the inks used in
preprinting can withstand fuser temperatures of 392˚ F
(200˚ C).
• Load 50 sheets or fewer, making sure the stack does not
exceed the upper paper limit mark on the side of the fold
down tray.
• Make sure the sheets do not become packed down as they
are loaded into the fold down tray. If the stack is
compressed, it will expand as the sheets begin to feed into
the printer and this can cause a jam.
• Make sure labels are not curled on the corners or coming
loose from the backing sheet.
• Do not use label sheets with exposed adhesives (such as
partially used sheets or sheets on which the adhesive has
seeped through to the surface).
• Do not use thick, rough, textured, curled, torn, or
otherwise damaged label stock.
• Do not use coated or synthetically reinforced label stock.