Xante Accel a Writer 812, Руководство пользователя

Страница: 50 / 312

2-24 Installation bb _________________________________________
2. Plug the DIN-8 connector on one LocalTalk connector box
into the 8-pin LocalTalk port on the back of the printer.
3. Plug the DIN-8 connector on the second LocalTalk connector
box into the printer port on your Macintosh (refer to your
Apple Macintosh manual).
4. Connect the two LocalTalk connector boxes with the RJ-11
phone cable.
5. Plug the terminating resistor(s) into the open socket(s) in the
connector box(es).
Fig. 2.18 Place a Terminating Resistor in the Open Socket
Note: Be sure to terminate the open sockets on the ends of
your LocalTalk network with the terminators supplied
with your LocalTalk connectors (fig. 2.18). (There
should only be two open sockets on the network, one
at each end.) Closing open sockets helps speed data
transmission and helps ensure the printer is available
in the Chooser.
6. Turn on the printer and host computer.
7. Select the Chooser from the Apple menu on your Macintosh
computer. The Chooser window opens.
8. Click the appropriate LaserWriter icon in the left side of the
window.
9. Select the Accel-a-Writer 812 in the right side of the Chooser
window.