Xante Accel a Writer 812, Руководство пользователя

Страница: 75 / 312

_____________________________________ Macintosh Setup 3-9
Installing XANTÉ Command Center
Your printer package includes Command Center. This program
allows you to perform many useful functions including the
following:
• Printer Status—provides a fast, easy method to check printer
status. For example, it can indicate if the printer is idle, ready to
print.
• Margin Adjustment—allows you to adjust the printer margins.
For details, see “Accurate Calibration Technology” in chapter 7.
• X•ACT Calibration—allows you to calibrate the printer’s engine
to print more precise horizontal and vertical dimensions within
the width of one dot. For details, see “Accurate Calibration
Technology” in chapter 7.
• Downloading PostScript Files—allows you to download
PostScript files to the printer.
• Test Directory—allows you to display a list of test files located
on the printer. You have options of printing, adding, or deleting,
or renaming most of these files. (A few files residing in the
printer’s ROM cannot be renamed or deleted.)
• Reboot Printer—allows you to reboot the printer.
• Startup Page—allows you to control whether the start-up page
prints when the printer is powered up.
• AppleTalk—has options for you to change the printer’s name or
its EtherTalk zone name.
• TCP/IP—allows you to set the address or enable LPR
(lineprinter).
To install Command Center, locate the icon on the utilities disk, and
drag it onto your system wherever you want it. (It does not have to
be in a particular folder.) To use the program, double click the icon
to open it. Features not applicable to your printer will be grayed out.