Xante Accel a Writer 812, Руководство пользователя

Страница: 56 / 312

2-30 Installation bb _________________________________________
Connecting to the Ethernet Port
Two methods can be used to connect to your printer’s Ethernet port.
One method uses an Unshielded Twisted Pair (UTP) or 10BaseT
connection, and the other uses thin coaxial cable (10Base2)
connection.
Both methods require an external transceiver which is available from
most computer stores or mail-order warehouses. The transceiver
should have an Apple AUI (Attachment Unit Interface) connector on
one end and either an Unshielded Twisted Pair (UTP or 10BaseT)
cable or a thin coaxial connection (ThinNet, CheaperNet, or
10Base2) on the other end. Figure 2.21 illustrates an example of both
a 10Base2 and a 10BaseT transceiver; however, designs vary slightly
among transceiver brands.
Apple AUI Connector
(To Printer)
10Base2 Transceiver
Unshielded Twisted Pair
RJ-45
10BaseT Transceiver
Thin Coaxial
Cable Connection
Fig. 2.21 Ethernet Transceivers and Cables