Woodward 2301E-HT, Руководство по эксплуатации продукта

Страница: 39 / 84

Manual 35092 2301E-HT Hydro (Francis Turbines)
Woodward 37
01 CNFG ANALOG IN #1: [*1 (1,8)] See list above for options
02 ANALOG IN #1 FUNCTION: The user can see the programmed function
03 CNFG ANALOG IN #2: [*1 (1,8)] See list above for options
04 ANALOG IN #2 FUNCTION: The user can see the programmed function
05 CNFG ANALOG IN #3: [*1 (1,8)] See list above for options
06 ANALOG IN #3 FUNCTION: The user can see the programmed function
07 CNFG ANALOG IN #4: [*1 (1,8)] See list above for options
08 ANALOG IN #4 FUNCTION: The user can see the programmed function
09 CNFG ANALOG IN #5: [*1 (1,8)] See list above for options
10 ANALOG IN #5 FUNCTION: The user can see the programmed function
11 CNFG ANALOG IN #6: [*1 (1,8)] See list above for options
12 ANALOG IN #6 FUNCTION: The user can see the programmed function
13 CNFG ANALOG IN #7: [*1 (1,8)] See list above for options
14 ANALOG IN #7 FUNCTION: The user can see the programmed function
15 CNFG ANALOG IN #8: [*1 (1,8)] See list above for options
16 ANALOG IN #8 FUNCTION: The user can see the programmed function
05 CONFIG CONTACT IN
This menu determines the functionality of discrete inputs 6-8. The integer for each discrete input below
must be tuned to the number that corresponds to the function desired. Each input can be used for any of
the following options:
1-
NOT USED
2- MANUAL CONTROL ENABLE
3- POND/TAIL LEVEL CONTROL ENABLE
4- AUTO FOLLOW ENABLE
5- GATE LIMIT RAISE
6- GATE LIMIT LOWER
7- CREEP INPUT #1
8- CREEP INPUT #2
9- DIRTY OIL SWITCH INPUT
10- GOVERNOR RESET
11- EXTERNAL START PERMISSIVE
12- UNLOAD
13- BASELOAD ENABLE
14- SPEED BIAS RAISE
15- SPEED BIAS LOWER
16- LOCAL/REMOTE
17- ENABLE kW DROOP
01 CONFIG DI #6 (F): [*1 (1,17)] See list above for options.
02 DI#6 FUNCTION: The user can see the programmed function
03 CONFIG DI #7 (G): [*1 (1,17)] See list above for options.
04 DI#7 FUNCTION: The user can see the programmed function
05 CONFIG DI #8 (H): [*1 (1,17)] See list above for options.
06 DI#8 FUNCTION: The user can see the programmed function
07 USE DI1 NC? [TRUE or *FALSE] If the discrete input#1 action is to be inverted put this variable to
TRUE.
08 USE DI2 NC? [TRUE or *FALSE] If the discrete input#2 action is to be inverted put this variable to
TRUE.
09 USE DI3 NC? [TRUE or *FALSE] If the discrete input#3 action is to be inverted put this variable to
TRUE.
10 USE DI4 NC? [TRUE or *FALSE] If the discrete input#4 action is to be inverted put this variable to
TRUE.
11 USE DI5 NC? [TRUE or *FALSE] If the discrete input#5 action is to be inverted put this variable to
TRUE.
12 USE DI6 NC? [TRUE or *FALSE] If the discrete input#6 action is to be inverted put this variable to
TRUE.
13 USE DI7 NC? [TRUE or *FALSE] If the discrete input#7 action is to be inverted put this variable to
TRUE.
Released