Wintriss SmartPAC PRO, Руководство пользователя

Страница: 277 / 318

1143100 SmartPAC PRO User Manual
Appendix C – Reporting Downtime and Scrap to SFC 277
Figure C - 17. Counters Screen with Scrap Value Updated to 30 Items
NOTICE
INDIVIDUAL SCRAP ENTRIES ARE ADDED TO THE CURRENT SCRAP TOTAL
The Scrap Value counter maintains a cumulative total of the scrap items documented for each job.
The value you enter in the Scrap Value Entry window (see Figure C - 15) is automatically added to
the total.
For example, if the count in the Scrap Value
field is “30,” and you want to include an additional 10
parts in the count, you would enter “10” in the Scrap Value Entry window (Figure C - 15). When you
are returned to the Counters screen, the Scrap Value counter would display 40 parts (the 30 parts
in the current total plus the 10 parts you entered; the Good Parts counter would be reduced by 10
parts (Figure C - 17).
6. Repeat step 2 for the remaining scrap entries associated with the current job until the job is
completed.
Adjusting the Good Parts Counter
NOTICE
You can only increase the value maintained by the Good Parts counter. You cannot decrease the
Good Parts counter except by entering scrap values.
NOTICE
You cannot adjust the Good Parts counter if the CHG GOOD PRTS CNT item on the Security
Access Menu has been set to “NO CHANGES ALLOWED.”
The Run mode Counters screen enables you to increase the Good Parts count to adjust for count
inaccuracies, such as when good parts may be produced but not counted in Setup mode or during
Fault conditions. The count can be increased by up to 1,000 parts at a time.
The Counters screen in Program mode allows you to increase Good Parts by larger amounts (see
Adjusting the Good Parts Counter in Program Mode, below). This capability is useful if new