Wintriss SmartPAC PRO, Руководство пользователя

Страница: 220 / 318

1143100 SmartPAC PRO User Manual
220 Chapter 7 – ProCamPAC Instructions
Viewing Cam Timing
You can view a real-time graphic display of the timing settings for your cams by pressing SHOW
CAM TIMING. A screen similar to Figure 7-20.
Figure 7-20. Cam Timing Screen
Cam channels are displayed by number on the Y-axis. Only eight channels can be displayed at a time,
so if a 16-channel ProCamPAC is installed, you must press CHANNELS 9-16. The X-axis displays
the number of degrees of crankshaft rotation (from 0

to 360

) at which channels turn on and off.
Channel On/Off and Auto Advance timing is shown as a colored horizontal bar, the end points of
which, when read against the crank angle “ruler” on the X-axis, specify on and off settings for that
channel. The bar for On/Off channels is blue, the bar for Auto Advance channels green with the letter
“A” at each end. When the dwell for an Auto Advance channel is very short, the A’s may display
with no bar between them. As press speed increases, the bar for Auto Advance channels moves to the
left.
Channels with Timed outputs are shown in pink characters beginning with the letter “T,” the position
of which, when viewed against the crank angle “ruler,” indicates the On angle, followed by a number
(e.g., 200), which indicates the channel’s On time in milliseconds.
The Cam Timing screen is updated once every second.