Wintriss SmartPAC PRO, Руководство пользователя

Страница: 136 / 318

1143100 SmartPAC PRO User Manual
136 Chapter 4 – SmartPAC PRO Program Mode
The crankshaft angle at which Strokes, Good Parts, Total Hits, and Batch counters is incremented can
also be programmed.
Setting Preset Values
Counter presets specify the count at which SmartPAC PRO initiates one of three programmed actions
(i.e., Top-stop, Toggle, or Pulse). To enter counter presets, do the following:
1. On the Tool Program Menu, select COUNTERS to display the Counters screen.
Figure 4-14. Count Preset Entry
2. Press the PRESET VALUE you want to enter. The Numeric Entry window displays, Figure 4-14.
3. Key in a preset value and press ENTER. The value you entered displays in the PRESET VALUE
field you selected. Setting the preset to 0 disables the output function (top stop, toggle, or pulse)
for the counter.
4. Repeat steps 2 and 3 for each counter preset you want to program.
Changing Count Values
Under some circumstances, you may need to adjust the count upward or downward, or you may want
to start the count at some value other than zero. To change count settings, do the following:
NOTICE
ARE YOU “LOCKED OUT”?
If you cannot change count values, security access for the CHANGE COUNTS function may be set
to NO CHANGES ALLOWED. See
SECURITY ACCESS , page 94.
1. On the Counters screen, select the setting displayed in the COUNT column of the counter you
want to adjust. The Numeric Entry window displays, Figure 4-14.
2.
Key in a new value and press ENTER. Repeat for each count you want to change.