WEG CFW-11 Series, Руководство по программированию

Страница: 247 / 307

16-5
16
Read Only Parameters [09]
P0011 – Cos Phi of the Output
Adjustable
Range: 0.00 to 1.00 Factory
Setting:
Properties: RO
Access groups
via HMI: 09 READ ONLY PARAMETERS
Description:
This parameter indicates the value of the cosine of the angle between the voltage and output current. The electric
motor are inductive loads and, therefore, consumes reactive power. This power is exchanged between the motor and
the inverter and does not produce useful power. According to the operating condition of the motor, the ratio [reactive
power / active power] may increase, resulting in a reduction of the output cosine
Ø .
P0012 – DI8 to DI1 Status
Refer to the Item 13.1.3 Digital Inputs [40] on page 13-12 .
P0013 – DO5 to DO1 Status
Refer to the Item 13.1.4 Digital Outputs / Relays [41] on page 13-20 .
P0014 – AO1 Value
P0015 – AO2 Value
P0016 – AO3 Value
P0017 – AO4 Value
Refer to the Item 13.1.2 Analog Outputs [39] on page 13-7 .
P0018 – AI1 Value
P0019 – AI2 Value
P0020 – AI3 Value
P0021 – AI4 Value
Refer to the Item 13.1.1 Analog Inputs [38] on page 13-1 .
P0023 – Software Version
Refer to the Section 6.1 INVERTER DATA [42] on page 6-2 , for more details.
P0027 – Accessories Configuration 1
P0028 – Accessories Configuration 2
P0029 – Power Hardware Configuration
Refer to the Section 6.1 INVERTER DATA [42] on page 6-2 , for more details.