WEG CFW-11 Series, Руководство по программированию

Страница: 125 / 307

11-7
11
Vector Control
NOTE!
(*) WEG motors that can be used with the Optimal Flux function: Nema Premium Efficiency, Nema
High Efficiency, IEC Premium Efficiency, IEC Top Premium Efficiency and "Alto Rendimento Plus".
When this function is activating, the motor flux is controlled in a way to reduce their electric losses on slow
speeds. That flux is dependent of the torque current filtered (P0009). The Optimal Flux function is unnecessary
in motors with independent ventilation.
11.5 TORQUE CONTROL
In vector control modes sensorless or with encoder, it is possible to use the inverter in torque control mode
instead of using it in speed control mode. In this case the speed regulator must be kept saturated and the
imposed torque value is defined by the torque limits in P0169/P0170.
Performance of the torque control:
Vector control with encoder:
Torque control range: 10 % to 180 %.
Accuracy: ± 5 % of the rated torque.
Sensorless vector control:
Torque control range: 20 % to 180 %.
Accuracy: ± 10 % of the rated torque.
Minimum operating frequency: 3 Hz.
When the speed regulator is positively saturated, i.e., forward speed direction defined in P0223/P0226, the
value for the torque current limitation is adjusted in P0169. When the speed regulator is negatively saturated,
i.e., reverse speed direction, the value for the torque current limitation is adjusted in P0170.
The torque at the motor shaft (T
motor
) in % is given by the formula:
(*) The formula described next must be used for "+" torque. For "-" torque, replace P0169 by P0170.
P0401 x P0169*
100
( P 0401)
2
- P 04 10 x P0178
2
100
x 100
T
motor
=