Lync AEGIS Controller
8: APPENDIX D
L-OMM-013_A
• 4/20/2022Technical Support • (800) 433-5654 • Mon-Fri, 8 am - 5 pm EST
67
of
100
9109
Oil
Oil temperature
●
●
●
°C
8975
Evap
Evaporation temperature
●
●
●
°C
8974
SpHeat
Superheating
●
●
●
°C
9674
Disch
Compressor discharge
temperature
●
●
●
°C
9079
Aext
External air temperature
●
●
°C
9588
Coil
Coil pack temperature
●
●
°C
9001
Fan sp
Fan speed
●
●
%
8994
RW in
Recovery cold water inlet
●
°C
8977
RW out
Recovery cold water outlet
●
°C
8994
SW in
Source cold water inlet
●
°C
8977
SW out
Source cold water outlet
●
°C
9886
BT3
Secondary hydraulic circuit
outlet water temperature
probe
●
●
●
°C
9887
2 Pmp
Secondary hydraulic circuit
water pump speed
●
●
●
%
Press BACK to return to the home page.
The unit can be enabled and disabled via digital contacts, BMS, or web interface. NOTE: both
the Enable and heating request status must be active in order to turn the unit ON.
8.7. Switching On/Off From Digital Input
8.7.4. General On/Off From Digital Input
A three-position switch is already connected to this input on the unit:
