Lync AEGIS Controller
8: APPENDIX D
L-OMM-013_A
• 4/20/2022Technical Support • (800) 433-5654 • Mon-Fri, 8 am - 5 pm EST
85
of
100
8.10. Service Menu
C A U T I O N !
Only qualified staff should edit the service parameters. Changing these parameters may
lead to malfunction and/or serious damage to the unit.
Press “Service” on the main menu to access the service menu. Press the RIGHT key to access
the window where a password must be entered to access the sub-menus.
In this window:
•
press the UP key to increase the password value by 1;
•
long press the UP key to increase the password value by 10;
•
press the DOWN key to reduce the password value by 1;
•
long press the DOWN key to reduce the password value by 10;
•
press the BACK key to close the password window and return to the main menu;
•
press the OK key to confirm the password.
If the password is incorrect, a message appears indicating that it has been incorrectly entered; if
the password is correct, the service menu is displayed. The presence of sub-menus depends on
the operating mode.
A/W A/W with CW recovery
W/W
Code
Description
A/W
A/W with CW
recovery
W/W
ST
Set point
●
●
●
RC
Remote control
●
●
●
AI
Anti ice settings
●
●
●
MD
Serial card RS485 configuration
●
●
●
ET
Ethernet configuration
●
●
●
DF
Defrost config
●
●
CR
Cold recovery settings
●
SW
Source water settings
●
