Lync AEGIS Controller
2: USER OPERATION VIA TOUCH SCREEN
L-OMM-013_A
• 4/20/2022Technical Support • (800) 433-5654 • Mon-Fri, 8 am - 5 pm EST
12
of
100
2. USER OPERATION VIA TOUCH SCREEN
2.1. Touch Screen
The touch screen 4.3 inch graphic terminal is designed to simplify user interface with the unit.
The electronic technology used and the 65K color display means high quality images and
advanced functions are available for a superior appearance. The touchscreen panel makes unit
operation much easier by simplifying navigation between the various screens.
2.2. About The Application For Unit
The touch user interface communicates with the internal controller to provide easy unit
operation. This application gives the user an overview of the main parts and controls of the
machine, visualization of the setpoints, the status of the main devices, and the control of the unit
mode, without needing to open the unit electrical cabinet.
In order to communicate with the main control, the touch interface is connected through the
RS485-2 serial port with the Modbus RTU protocol with a baud rate of 34800 and a
communication set of 8N1.
2.3. Homepage
The homepage displays the main operating data of the unit: the unit ON / OFF status, the water
inlet and outlet temperatures, as well as the status of the compressor, pump and fan speed.
At the bottom there are icons for accessing additional screens, explained in the next sections. In
the presence of any alarms, their number is indicated in a red circle in the upper right corner.
Press the bell icon to view its description.
