765-4501/0100-0000
Commissioning
106
Product manual | Version: 1.1.0
8PORT IOL-A FLD EI DC 24V 2.0A
Figure 24:
Sign in
Menu Item – Input Screen for Username and Password
2. Enter your username and password into the corresponding fields.
3. Click the
[Sign in]
button.
ð
If you have entered a known username correctly, you can now work with the WAGO I/
O Field Webserver with this user’s specified rights. The username that was used to
log on is shown in the upper left-hand corner. The
Sign in
menu item changes to
Sign out
.
Logging Users off
Proceed as follows to log a user off:
•
From the Webserver main menu (left), select the
Sign out
menu item.
ð
You can now no longer work in the WAGO I/O Field Webserver with the rights you
had been using till this point. The username used to log on is no longer shown in the
upper left-hand corner. The
Sign out
menu item changes back to
Sign in
.
Guest User Access
By default, the Webserver recognizes the user
guest
without a password; this was set
up for initial access or guest access.
Initial Login as Administrator
Upon delivery or after a reset to the factory settings, the WAGO I/O Field Webserver can
be accessed with the username
root
and password
password
. This combination has
administrator rights.
Note
Change the administrator password immediately after commissioning. The factory
default setting is widely known and does not provide adequate protection.
