Vodavi Starplus Triad-S, Руководство пользователя

Страница: 92 / 512

2-66 CO Line Group
Chapter 2 - Features and Operation
Conditions
»
Only one station at a time can be programmed when using a flexible station number.
»
When in Flash 51 programming, if you press HOLD without specifying a flexible number
to be programmed, you will get the station that is in port/station 100.
CO Line Group Programming
Description
Twenty four line groups are available for CO line assignment. Groups should be assigned
according to type (local, FX, WATS, etc.). All unassigned CO lines should be programmed into
a different group so they are not accessed by Line Queuing, Pooled Group access (Pool
Buttons), Speed Dial, or LCR features.
Any Line Group can be used for programming a line(s) as private; for private lines, assign Line
Group access to only one station in Flash 50/51, Page B, Button #8. Ordinarily, use Line
Group 0 as a private line. Also, all unused CO Lines should be placed in Line Group 0.
CO Lines assigned to a Line Group 0 can only be accessed by stations with a direct CO
appearance (button) on their phone.
Programming Steps
1. Press FLASH and dial [40] . The following message displays:
2. Enter a valid number for the range of lines being programmed. If only one line is being
programmed, enter that number twice (001 001).
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible button #19 (Page A) is lit. The following message displays to indicate current
programming of that line or group of lines:
XXX-XXX = CO Line Range
4. Press the CO LINE GROUP flexible button
(FLASH 40, Page A, Button #8)
.
When tying multiple systems together, use the Networking Table (FLASH 16).
C O L I N E AT T RI B U T E S
S E L E C T A C O L I N E R A N G E
If HOLD is pressed without entering a CO range, ALL CO lines are selected.
X X X - X X X PAG E A
E N T E R B U T TO N N U M B E R