Vodavi Starplus Triad-S, Руководство пользователя

Страница: 239 / 512

Speed Dial 2-213
Chapter 2 - Features and Operation
2. Press the SPEED button and dial speed bin location,
-or-
Press the preprogrammed speed bin button.
To store speed dial numbers:
1. Press the SPEED button once.
2. Press an OUTSIDE LINE button or POOL button.
-or-
Select an outside line by pressing the SPEED button again.
3. Dial the speed bin location.
4. Dial the desired telephone number and include these special codes:
TRANS -- Initiates a Pulse-To-Tone switchover.
HOLD -- Inserts a Pause.
FLASH -- Inserts a Flash into the speed number.
TRANS -- When used as the first entry in the speed bin, this inserts a no-display
character causing numbers stored in the bin not to appear on the digital telephone’s
display when bin is accessed.
5. Press the SPEED button.
6. Replace the handset to end the speed bin programming.
To program multiple speed numbers:
1. Press the SPEED button twice to conclude programming a number.
2. Enter the next speed number bin to program.
If the station has no line appearance for the line programmed into the speed bin, that line
comes up under the LOOP button or POOL button when accessed.
To erase an existing speed bin:
1. Press the SPEED button twice.
2. Dial the speed bin location.
3. Press the SPEED button again. A confirmation tone sounds.
SINGLE LINE TELEPHONE
To use speed dial:
1. Lift handset.
2. Dial [668] on the dial pad.
3. Dial desired station or system speed bin number (9000-9999).
4. Replace the handset to end the call.
Many Centrex codes utilize a hook-flash followed by, in many cases, the digit [
✳
]
and or [#]. The
Triad-S
allows programming of these codes as a part of system or
station speed dial sequences.