Vodavi Starplus Triad-S, Руководство пользователя

Страница: 222 / 512

2-196 Privacy Release
Chapter 2 - Features and Operation
Programming Steps
1. Press
FLASH
and dial
[40]
. The following message displays:
2. Enter a valid number for the range of lines being programmed. If only one line is being
programmed, enter that number twice (001 001).
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible button #19 (Page A) is lit. The following message displays to indicate current
programming of that line or group of lines:
XXX-XXX = CO Line Range
4. Press the PRIVACY flexible button (FLASH 40, Page A, Button #5) .
5. Enter a 0 or 1 on the dial pad to enable/disable this feature.
[0] = Disabled
[1] = Enabled
6. Press HOLD to save the entry. A confirmation tone sounds.
Disabling Privacy Function:
The system can be programmed to eliminate CO Line Privacy, which allows another station to
join existing outside line conversations as follows:
Stations must have a direct CO line appearance to join CO line conversations in progress.
A station must also have Privacy disabled before the system allows that station to enter
an existing conversation.
A programmed warning tone is presented to both parties prior to actual cut-through
(Flash 06, Button 1).
Up to seven other stations may join an existing conversation.
The station joining the call receives a solid red LED indication.
C O L I N E AT T R IB U T E S
S E LE C T A CO LI N E R A N G E
If HOLD is pressed without entering a CO range, ALL CO lines are selected.
X X X - X XX PAG E A
E N T E R B U T TON N U MB E R
P R I VA C Y 0-1
E N A B LE D
Disabling the privacy feature may be limited by federal, state or local law, so
check the relevant laws in your area before disabling privacy.