Vodavi Starplus Triad-S, Руководство пользователя

Страница: 78 / 512

2-52 Centrex/PBX
Chapter 2 - Features and Operation
Centrex/PBX Flash Timer
Description
Flash is a programmable opening on a line for signaling. When using an outside line, flash lets
a user obtain a new dial tone without losing the line. This is particularly useful behind a PBX
or Centrex. Each CO line can be programmed for a flash time.
Programming Steps
1. Press
FLASH
and dial
[40]
. The following message displays:
2. Enter a valid number for the range of lines being programmed. If only one line is being
programmed, enter that number twice (001 001).
3. Press Button #21 to select Page C. The display updates. The following message displays to
indicate current programming of that line or group of lines:
XXX-XXX = CO Line Range
4. Press the FLASH TIMER flexible button (
Button #1)
.
5. Enter a valid number on the dial pad (01–20) which corresponds to 100 ms to 2 seconds.
6. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT … Flash Timer is set for 10 (1.0 seconds) and is variable from 01-20 (100 ms to
2 seconds).
Centrex / PBX Transfer
Description
When Centrex or PBX lines are connected to the Triad-S , users may, by using the Flash button,
transfer callers to other Centrex or PBX extensions. The Flash command may also be included
within a Speed Bin and programmed onto a flexible button for one button transfer. Consult
your Centrex user guide for further instructions after flashing the line. Refer to
“Centrex/PBX
Flash Timer” on page 2-52 .
CO LI N E AT T R I B U T E S
S E LE C T A CO L IN E R A N G E
If HOLD is pressed without entering a CO range, ALL CO lines are selected.
X XX - X X X PAG E C
E N T E R B U T TO N N U M B E R
F L AS H T IM E R 01- 20
1 0