2-98
Dial Pulse Sending
Chapter 2 - Features and Operation
Dial Pulse Sending
Description
Each CO interface circuit for outside lines can be programmed to send dial pulse or DTMF
signals. Dialing speed and break/make ratios are programmable.
Dial Pulse Parameters
Description
The Dial Pulse option lets the installer adjust the dial pulse ratio and speed when using dial
pulse (rotary) type signaling. By default, all lines are DTMF (tone) signaling. If pulse dialing is
required, the individual outside line must be programmed for Dial Pulse (DP). When Dial
Pulse is selected, this system-wide parameter must be set to determine the break/make ratio
and the dial speed of the dial pulse signal.
Programming Steps
1. Press the DIAL PULSE flexible button
(FLASH 41, Button #1)
. The following message
displays:
2. Enter a valid number (0–3) which corresponds with the following entries:
[0] = 60/40 (RATIO), 10 pps (SPEED)
[1] = 66/33 (RATIO), 10 pps (SPEED)
[2] = 60/40 (RATIO), 20 pps (SPEED)
[3] = 66/33 (RATIO), 20 pps (SPEED)
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT … 60/40 10 pps
Pulse Dial Inter-Digit Timer
Description
This governs the inter-digit time of the Pulse Dial Digits, rotary dial mode. The Pulse Dial Ring
Timer setting is variable from 300-600 ms.
This program code is only used when an outside (CO) line is programmed for Dial
Pulse.
DI A L PU L S E
6 0 / 4 0 1 0 P P S
Содержание Starplus Triad-S
