Vodavi Starplus Triad-S, Руководство пользователя

Страница: 398 / 512

B-10 Programming LCR Tables
Chapter - Least Cost Routing
3. To enter additional CO Line groups in the same Time Period Route List number,
dial [GG] + [DD] + [L], then press HOLD.
To enter data for a different time period route list:
1. Press program FLASH 75, Button #4 and enter all data (RR T GG DD L).
2. Repeat the above to program a new Route Number 00 to 15 or press a flexible button to
program other LCR information.
3. To advance to the next entry, use Button #18.
4. To return to a previous entry, use Button #19.
When Call Cost feature is enabled in FLASH 05, Button #11, the following message
displays.
RR = Route List Table Number 00- 15
T = Time Period Route List 1- 4
CCC = Cost for one minute ($ 0.00 –$ 9.99)
GG = CO Line Group 00-23
DD = Insert/Delete Table reference 00-19 (## for none)
L = LCR Class of Service (LCOS)
Insert / Delete Table
Description
Digits can be either added or deleted when dialing a number. For instance, if a user dials a
long distance call that should be placed on a foreign exchange (FX) line, the digit [1] and the
three-digit area code (NPA) dialed by the user must be deleted before the call can be placed
on that FX line. An Insert/Delete table can be programmed to do this.
Digits can also be added to a number that has been dialed by the user. For instance, Other
Common Carrier (OCC) access codes and authorization (ID) codes can be automatically
inserted by the system either in front of, and/or behind the number dialed.
There are twenty Insert/Delete Tables and each allows entries in a delete table and a pre- and
post-insert table. Up to 40 digits (including pauses) can be inserted (20 pre and 20 post) and
up to 16 digits can be deleted. Digits can be inserted before or after the number dialed, but
can be deleted only from the start of the number dialed.
To ensure that a pause is inserted in LCR at default, the database programming was changed
to add a pause in each of the 20 LCR Insert and Delete Tables and insert table 0 in each of the
route tables.
Programming Steps
1. Press INSERT/DELETE TABLE flexible button (FLASH 75, Button #5) . The following
message displays:
R OU T E L I S T TA B L E
R R T C CC G G DD L
D I G IT IN S E R T / D E L E T E
E N T E R T T X DD D H O LD