Vodavi Starplus Triad-S, Руководство пользователя

Страница: 399 / 512

Programming LCR Tables B-11
Chapter - Least Cost Routing
2. Enter the table information as follows:
T T = Insert/Delete Table Number 00–19
X = [0] Pre-Delete numbers (first digits dialed in the number),
-or-
[1] Pre-Insert numbers (insert digits in front of number dialed,
-or-
[2] Post-Insert numbers (insert digits behind number dialed).
DDD = Digits (up to 16-digits may be deleted from the beginning
of the number dialed and up to 40 digits can be inserted (20 pre and 20 post).
3. Press the HOLD button to save the entry. A confirmation tone sounds and the display
updates.
To add and delete numbers in the same table:
1. Enter the different Insertion/Deletion tables in step 1.
2. Enter as separate entries using the same table number.
3. In the Insert Tables for LCR Programming, press the TRANS button for a pause.
The [
✳
] and [#] digits are allowed as valid digits for inserting digits dialed over the
network.
The [
✳
] and [#] are valid entries for adding digits in both the pre (in front of) or post
(behind the number) tables.
The [
✳
] and [#] cannot be used as delete characters in the Delete tables.
To delete a table:
Enter a valid table number and press the HOLD button.
Daily Start Time Table
Description
The Daily Start Time Table correlates the LCR Routing Table to the time sensitive discount
structure offered by the customers carrier.
EXAMPLE -- In the most common situation:
The most expensive rate period is between 8:00 am and 5:00 pm, often called the day
rate.
The first discount period usually starts at 5:00 pm and runs until 11:00 pm, often called
Evening Rates.
The remaining time (from 11:00 pm until 8:00 am) is referred to as night time rates which
usually have the biggest discount.
Weekly Time Table -- With the wide selection of Common Carriers, the least costly route for a
particular area code may be different at different times of the day. To accommodate this
situation, this table and the Weekly Time Table work together, dividing the day into four
possible time periods. By default these tables are set at the standard divisions of 8 am, 5 pm,
and 11 pm. However, these times can be changed.