Vodavi Starplus Triad-S, Руководство пользователя

Страница: 268 / 512

2-242 Toll Restriction
Chapter 2 - Features and Operation
Entering Toll Table
Description
All toll tables have been conveniently placed under one program code to allow entry of all
toll restriction data.
The buttons on the digital terminal are defined as shown below when entering the Toll
Restriction programming area (FLASH 70):
When the system searches the Allow and Deny tables, the entries are checked starting with
Bin 01 and proceeding sequentially through the table to the last bin. In addition the Allow
Table is always searched before looking at the Deny Table. Therefore, the entry order is
important. Entries that are specific (e.g., [1716] ) are placed ahead of entries that are more
general (usually include Do Not Care digits; e.g., [1 D 1] ).
Once a match is found in the Allow Table that references a Special Table, the number dialed
are checked for an allowed code in the Special Table. If a match is not found in the Special
Table, the system continues to check for a match in the next Allow or Deny Table to check.
The system does not return to the table that sent the call to the Special Table.
Programming Steps
If the system is in the programming mode, continue using the program codes. If starting to
program here, enter the programming mode.
1. Press
FLASH
and dial
[70]
. The following message displays:
2. To program Allow/Deny tables, press the appropriate Table button and enter information
as outlined in the following procedures.
ALLOW
TABLE A
DENY
TABLE A
ALLOW
TABLE B
DENY
TABLE B
✺
1 Q
✺
2 W
✺
3 E
✺
4 R
SPECIAL
TABLE 1
SPECIAL
TABLE 2
SPECIAL
TABLE 3 SPECIAL
TABLE 4
✺
5 T
✺
6 Y
✺
7 U
✺
8 I
AREA CODE
TABLE 1
AREA CODE
TABLE 2
AREA CODE
TABLE 3
DISPLAY
TABLES
✺
9 O
✺
10 P
✺
11 A
✺
12 S
✺
13 D
✺
14 F
✺
15 G
✺
16 H
✺
17 J
✺
18 K
✺
19 L
✺
20 ;
✺
21 Z
✺
22 X
✺
23 C
✺
24 V
E X TA B LE S
E N T E R B U T T ON N U M B E R