Vodavi Starplus Triad-S, Руководство пользователя

Страница: 404 / 512

B-16 Programming LCR Tables
Chapter - Least Cost Routing
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible button #19 is lit. The display updates to reflect current programming for Page A:
4. Press the FORCE LCR flexible button
(Button #11)
. The following message displays:
5. Enter a 0 or 1 on the dial pad to enable/disable this feature.
[0] = Disabled
[1] = Enabled
6. Press HOLD to save the entry. A confirmation tone sounds.
Conditions
»
Only one station at a time can be programmed when using a flexible station number.
»
When in Flash 51 programming, if you press HOLD without specifying a flexible number
to be programmed, you will get the station that is in port/station 100.
LCR Class of Service (COS)
Description
Stations can be given a class of service assignment for Least Cost Routing. The range is
between 0-6, with 0 being unrestricted and 6 the most restricted. A station can use LCR
routes with a priority number equal to or higher than the stations LCR COS assignment.
Stations are given unrestricted access (0).
Use Flash 50 programming when you want to modify a range of stations’ attributes using
fixed station numbers.
Use Flash 51 programming to modify a single station’s attributes using a flexible station
number.
Programming Steps
1. Press FLASH and dial [50] or dial [51] . Flexible button #24 (New Range) is lit and one of
the following messages displays:
Flash 50 - Fixed Numbers Flash 51 - Flexible Numbers
X XX - X X X PAG E A
E N T E R B U T TO N N U M B E R S X X X PAG E A
E N T E R B U T T ON N U MB E R
XXX-XXX = fixed station range XXX = 3- or 4-digit flexible number
F O R C E LC R 0-1
D I S AB LE D
Flash 50 - Fixed Numbers Flash 51 - Flexible Numbers
S TAT IO N AT T R IB UT E S
S E L E C T A S TAT I O N R A N G E E N T E R S TAT IO N N U M B E R