PowerMaster-360R Quick user guide
To review the open zones click
. The details and location of the first open zone detector (usually an open
door or window sensor) will be displayed. To fix the open zone, locate the sensor and secure it (close the door
or window) – see device locator below. Each click of
will display another open zone or trouble indication. It
is highly recommended to fix the open zone(s), thus restoring the system to the state of ready to arm. If you do
not know how to do this, consult your installer.
Note:
To quit at any stage and to revert to the READY display, click
.
Device Locator:
The PowerMaster-360R system has a device locator that helps you to identify open or troubled
devices indicated on the LCD display. While the LCD displays an open or faulty device, the LED on the
respective device flashes indicating
it's me
. The
it's me
indication will appear on the device within a maximum
16 seconds and will last for as long as the LCD displays the device.
Zone Bypass Scheme
Bypassing permits arming only part of the system and at the same time allowing free movement of people within
certain zones when the system is armed. It is also used to temporarily remove from service faulty zones that
require repair work or to deactivate a sensor if, for example, you are decorating a room.
You can set the Zone Bypass Scheme i.e. to scroll through the list of registered (enrolled) sensors to your
PowerMaster-360R system and to Bypass (deactivate) faulty or disturbed sensors (either READY or NOT-
READY) or to Clear (reactivate) BYPASSED zones (sensors).
Once you have set a Bypass Scheme you can use the following 3 options:
To quickly clear a bypassed zone i.e. to reactivate the bypassed zone – refer to
Chapter 4, section B.1 of the
PowerMaster-360R
User’s Guide.
To quickly review the bypassed zones – refer to
Chapter 4, section B.2 of the PowerMaster-360R
User’s Guide.
To repeat (recall) the last used zone bypassing scheme – refer to Chapter 4, section B.3 of the
PowerMaster-360R User’s Guide.
