4. Programming
24
D-307083 PowerMaster-360R Installer's Guide
4.4.4 Modifying or reviewing a device
To
Modify
or
Review
the device parameters proceed as follows:
Step 1
Step 2
Step 3
Step 4
Step 5
Select MODIFY
DEVICES Option
[1]
Select the respective
device Group
[2]
Select exact device
you wish to modify
[3]
Select the Parameter
you wish to modify
[4]
Modify the
Parameter
02:ZONES DEVICES
CONTACT
SENSORS
MODIFY SENSORS
MOTION SENSORS
Z10:Motion Camra
ID No. 140-1737
Z10:LOCATION
Z10:ZONE TYPE
Z10:SET CHIME
Z10:PARTITIONS
Z10:DEV SETTINGS
See
[4]
When
done
to
step 2
– Modifying or Reviewing a Device
[1] Enter the
Installer Mode menu
, select the
02:ZONES/DEVICES
option (see section 4.2) and then select the
MODIFY DEVICES
option.
[2] Select the respective group of the device you wish to review or modify. For example,
MOTION SENSORS
.
[3] Scroll the Device Group, identify (by zone and/or ID number) of the exact device you wish to modify or review, for
example:
Z10:Motion Camra
>
ID No. 140-1737
.
[4] From here on the process is same as the configuration process that follows the enrollment of that device. To
continue, refer to Section 4.4.2 Adding a New Wireless Device Part B. When done, the display will show the
next device of the same type (i.e. Motion camera).
4.4.5 Replacing a device
Use this option to replace a faulty device that is enrolled in the system with another device of the same type number
(i.e. same first 3 digit of the ID number – see section 4.4.2.A) while keeping the same configuration of the original
device. There is no need to delete the faulty device or to reconfigure the new device. Once enrolled, the new device will
be configured automatically to the same configuration of the faulty (replaced) device.
To
Replace
, a device proceed as follows:
Step 1
Step 2
Step 3
Step 4
Step 5
Select REPLACE
DEVICES Option
[1]
Select the respective
device Group
[2]
Select exact device
you wish to replace
[3]
Enroll the new device [4]
02:ZONES/DEVICES
CONTACT
SENSORS
REPLACE DEVICES
KEYFOBS
K03:Keyfob
ID No. 300-0307
ENROLL NOW or
ENTR ID:300-XXXX
See
[4].
– Replacing a Device
[1] Enter the
Installer Mode menu
, select the
02:ZONES/DEVICES
option (see section 4.2) and then select the
REPLACE DEVICES
option.
[2] Select the respective group of the device you wish to replace. For example,
KEYFOBS
.
[3] Scroll the Device Group, identify (by zone and/or ID number) the exact device you wish to replace, for example:
K03: Keyfob
>
ID No. 300-0307
.
If you try enrolling a new device of a different type than the replaced device, the PowerMaster-360R will reject
the new device and the Virtual or Touch Keypad display will read
WRONG DEV.TYPE
.
When done, the Virtual or Touch Keypad display shows the device details of the new device.
