Vishay G4, Техническое руководство, Страница: 78 / 200

Technical Manual
3-46
Range/Alternatives Explanation and
<default value> result of alternatives.
AOUT1 Range Low (- AOUT4 Range Low)
Range:
+/–999999
Unit:
Measurem. unit
or flow unit
<0> Defines the weight/flow rate value that should
give the lowest output (0 V / 0 mA / 4 mA) at this
Analog output.
Note: this parameter is not shown if parameter
‘AOUT1 Source’ is ‘Not in use’.
AOUT1 Range High (- AOUT4 Range High)
Range:
+/–999999
Unit:
Measurem. unit
or flow unit
<500> Defines the weight/flow rate value that should
give the highest output (10 V / 20 mA) at this
Analog output.
Note: this parameter is not shown if parameter
‘AOUT1 Source’ is ‘Not in use’.
AOUT1 Bandwidth (- AOUT4 Bandwidth)
1.6 Hz
3 Hz
6 Hz
12 Hz
25 Hz
50 Hz
100 Hz
<100 Hz> Sets the analog output bandwidth.
Note: this parameter is not shown if parameter
‘AOUT1 Source’ is ‘Not in use’.
AOUT1 Low Adj. (- AOUT4 Low Adj.)
Range:
+/-2.000
Unit: %
<0.000> Gives a possibility to adjust the offset of the analog
output. This allows for the reading of an external
instrument connected to the analog output to be fine-
tuned. Full adjustment range corresponds to
approxi/-2% of maximum analog output.
The parameter value will be set to zero each time
‘AOUT1 Output Type’ is changed.
Note: this parameter is not shown if parameter
‘AOUT1 Source’ is ‘Not in use’.
AOUT1 High Adj. (- AOUT4 High Adj.)
Range:
+/-2.000
Unit: %
<0.000> Gives a possibility to adjust the gain of the analog output
signal. This allows for the reading of an external
instrument connected to the analog output to be fine-
tuned. Full adjustment range corresponds to
approxi/-2% of maximum analog output.
The parameter value will be set to zero each time
‘AOUT1 Output Type’ is changed.
Note: this parameter is not shown if parameter
‘AOUT1 Source’ is ‘Not in use’.