Vishay G4, Техническое руководство, Страница: 40 / 200

Technical Manual
3-8
Menu structure
(Next page)
Main Menu
*Levels
*Setpoints
*Preset Tare
*Accum. Weights
*Batched Weights
*Clock Set-up
*Param. Set-up
*System Info.
*Maintenance
*Network Config
General
Language
Instrument Name
Start Mode
Display Contrast
Date Format
Time Format
Gross/Net key
Tare key
Print key
Zero key
Operator Lock
Operator Code
Set-up Lock
Set-up Code
Warm Up Time
Hardware Config.
Fieldbus
Slot 1 Module
Slot 1,1 Scale
Slot 1,2 Scale
Slot 2 Module
Slot 2,1 Scale
Slot 2,2 Scale
Slot 3 Module
Slot 3,1 Scale
Slot 3,2 Scale
Calibration
*Scale 1
*Scale 2
*Scale 3
*Scale 4
*Scale 5
*Scale 6
*Scale 7
*Scale 8
Communication Level Superv.
*Level 1
*Level 2
*Level 3
…….
*Level 31
*Level 32
Scale 1..8
1:Scale Name
1:Measurem. Unit
1:Resolution
1:Capacity
1:HSWF Update R.
1:WFIN Update R.
1:Filter Window
1:Motion d. Wind
1:No Motion Dely
1:Motion Check
1:Min. Weight Pr
1:Overload Check
1:Overload Limit
1:Zero Tracking
1:Z-Track.Rate
1:Tare Corr.Mode
1:Calibr. Type
1:Conv. Factor
1:No of Transd
1:Rated Load
1:Rated Output 1
1:Rated Output 2
1:Rated Output 3
1:Rated Output 4
1:Set Zero
1:Zero Offset
Data sheet calib:
Table calibration:
1:Calibr. Type
1:No of Cal. P
1:Value Cal. P1
1:Value Cal. P2
1:Value Cal. P3
1:Value Cal. P4
1:Value Cal. P5
1:Value Cal. P6
1:T.Signal P1
1:T.Signal P2
1:T.Signal P3
1:T.Signal P4
1:T.Signal P5
1:T.Signal P6
1:Set Zero
1:Zero Offset
Deadw. calib:
Note that Batching and Flow rate are optional. The respective parameters and
menus are only shown when the program option is enabled.
*menu
Level 1..32
Level 1 Source
Level 1 Scale
Level 1 Output
Level 1 Hyst.
Modbus Address
COM1:Mode
COM1:Baudrate
COM1:Data Format
COM1:Min Reply T
COM1:Float Form.
COM1:Print Pos.1
COM1:Print Pos.2
COM1:Print Pos.3
COM1:Print Pos.4
COM1:Linefeeds
COM2:Mode
COM2:Baudrate
COM2:Data Format
COM2:Min Reply T
COM2:Float Form.
COM2:Print Pos.1
COM2:Print Pos.2
COM2:Print Pos.3
COM2:Print Pos.4
COM2:Linefeeds
*Modbus TCP Slave
*External I/O
*EtherNet/IP
Serial Com. Ethernet
1:Flow Calc.
1:Flow Rate Res.
1:Flow Rate Unit
1:Auto Deriv. T
1:Deriv. Time
Levels
Level values for
configured levels
Setpoints
Setpoint values
for configured
setpoints
Accum. Weights
Accumulated
(printed) Weights
for all scales
Batched Weights
Acc. (batched)
Weights for all
scales.
Only shown if
batching option is
enabled.
Scale 1..8 Calib
*Scale 1 Calib
*Serial Com.
*Ethernet
*Fieldbus
Modbus TCP Slave
Float Format
Modbus TCP Slave
Preset Tare
Preset tares for
scales configured
for use of preset
tare
Clock Set-up
Date and time
set-up
IP Address
Ext. I/O Mode
Conf.Wago Watchd
External I/O
(Next page)
Menu structure (continued)