Vishay G4, Техническое руководство, Страница: 49 / 200

G4 Multi Channel Weighing Instrument
3-17
Range/Alternatives Explanation and
<default value> result of alternatives.
1:Capacity
Range:
0.5 to 999999
Unit:
Measurem. unit
<500> Nominal range of scale.
Capacity / Resolution = Number of divisions.
1:HSWF Update R.
12.5 Hz
25 Hz
50 Hz
100 Hz
200 Hz
400 Hz
800 Hz
<50 Hz> Defines the update rate for the measuring channel belonging to
scale 1 if the weight conversion module is of HS WF2 type.
Note: this parameter is only shown if the weight conversion
module belonging to scale 1 is of HS WF2 type.
1:WFIN Update R.
2.3 Hz
4.6 Hz
9.3 Hz
19 Hz
37 Hz
75 Hz
150 Hz
300 Hz
<37 Hz> Defines the update rate for the measuring channel belonging to
scale 1 if the weight conversion module is of WFIN or WFIN 2
type.
Note: this parameter is only shown if the weight conversion
module belonging to scale 1 is of WFIN or WFIN 2 type.
1:Filter Window
Range:
0 to 999999
Unit:
Measurem. unit
<10 * Resolution> The instrument produces unfiltered and filtered weight internally.
If the difference between the filtered and unfiltered weights is
less than ‘Filter window’ the filtered weight is used. This
parameter value has one decimal more than parameter
Resolution, to allow ‘Filter window’ to be smaller than the
resolution.
1:Motion d. Wind
Range:
0 to 999999
Unit:
Measurem. unit
<1 * Resolution>
Motion status is ‘on’ when the weight value is not stable. It goes
off when the weight has been stable for the
‘No motion delay time’. Motion condition exists if the weight
change during a certain measuring period is greater than the
window ‘Motion detect window’. The measuring period is one
conversion time (‘Update Rate’) or at least 200 ms. This
parameter value has one decimal more than parameter
Resolution, to allow ‘Motion detect w.’ to be smaller than the
resolution.