Vishay G4, Техническое руководство, Страница: 48 / 200

Technical Manual
3-16
Range/Alternatives Explanation and
<default value> result of alternatives.
Menu ‘Scale 1’
The Calibration menu contains up to 8 sub menus, one for each installed/used scale.
The parameters are the same for all 8 scale menus. Here only scale 1 parameters are
shown. Note that the scale number is shown as a prefix to the parameter name, here
‘1:’
1:Scale Name
<> A 16-character string that is used at printing in reports etc.
Note: the VIEWPAN display can’t view all characters that can be
set-up on a graphical screen type of system. The VIEWPAN can
only set characters it also can view.
1:Measurem. Unit
NONE
g
kg
t
lb
oz
N
daN
kN
psi
kPa
MPa
bar
lbf
kgf
Nm
N/m
kN/m
PLI
l
mV/V
pls
<kg> Defines the engineering unit that should be
used for the measured value and for related
set-up parameters.
1:Resolution
0.001
0.002
0.005
0.01
0.02
0.05
0.1
0.2
0.5
1
2
5
10
20
50
<0.1> Defines the decimal point position and resolution format for the
displayed value. All set-up parameters using the measurement
unit will be written with the decimal point position selected in this
menu.
If the last digits of the weight value are not stable, a more coarse
resolution can be selected to get a stable reading.