Vishay G4, Техническое руководство, Страница: 74 / 200

Technical Manual
3-42
Range/Alternatives Explanation and
<default value> result of alternatives.
Menu ‘Inputs Slot 1’ - ‘Inputs Slot 3’
NOTE: There are three possible sub menus, one for each slot. In each slot sub menu
there are up to 8 possible inputs named 11 to 18 for slot 1, 21 to 28 for slot 2 and so
on. Each input has the parameters described below. Note that input numbering below
only show inputs belonging to slot 1. The ‘Inputs Slot X’ is only shown if there is a
module with inputs selected for slot X. The number of displayed inputs is the number of
inputs of the specific module selected in menu ‘Hardware Configuration’.
Input 11 Use (- Input 18 Use)
Not in use
Tare
Gross/Net
Gross
Net
Zero
Flow/Weight
Flow Rate
Weight
Print
Start Batching
Stop Batching
Reset Batching
Restart Batching
Reset B. Alarm
Skip Activity
Finish Batching
Batch. Activity
< Batch. Activity > Defines the use of the internal digital inputs in the instrument.
Not in use: The input is not used.
Tare: Input used for taring command.
Gross/Net: Input used for gross/net toggling.
Gross: Input used to switch to gross mode.
Net: Input used to switch to net mode.
Zero: Input used for zero command.
Flow/Weight: Input used for flow rate/weight toggling.
Flow Rate: Input used to switch to flow rate mode.
Weight: Input used to switch to weight mode.
Print: Input used for print command.
Start Batching: Input used to start batching.
Stop Batching: Input used to stop batching.
Reset Batching: Input used to terminate a halted batching.
Restart Batching: Input used to continue a halted batching.
Reset B. Alarm: Input used to reset a batching alarm.
Skip Activity: Input used to skip the rest of a halted batching
activity.
Finish Batching: Input used to continue batching until the
actual batch is finished.
Batch. Activity: Input used in batching activities for
acknowledgment signal or pulse batching.
The default setting ‘Batch Activity’ will give the same result, as
setting the input to ‘Not in use’ unless the input is used in
batching.
Input 11 Scale (- Input 18 Scale)
1
2
3
4
5
6
7
8
<1>
1: Scale number 1 uses the input.
2: Scale number 2 uses the input.
….
8: Scale number 8 uses the input.
Note: this parameter is not shown if parameter
‘Input 11 Source’ is ‘Not in use’ or ‘Batch. Activity’.