VIPA System 200V IM Series, Руководство пользователя

Страница: 316 / 348

Chapter 8 Ethernet coupler
Manual VIPA System 200V
8-12 HB97E - IM - Rev. 06/29
WinNCS for project engineering
The access happens via Port 5048 on the configuration server.
The configuration server calculates the number of plugged modules, their
address and parameter ranges and puts the information under its IP
address at the disposal of WinNCS.
WinNCS searches all couplers of the network via broadcast (slaves). The
network to search is here until the gateway.
The collected data is used by WinNCS to model a symbolic network and is
monitored in the network window.
Now you may assign real module types to the symbolic network and
parameterize them.
Now you can assign an IP address to the Ethernet coupler online and
update the firmware.
In WinNCS you also define the http web server properties of the Ethernet
coupler.
All changing accesses are password protected. The password is requested
once per session and slave.
In delivery state the password is
00000000
Note!
Before you may access the Ethernet slave via internet browser, you have
to assign an IP address according to your network. This may happen online
via WinNCS.
Internet Browser for diagnosis and test
The access is via Port 80 at the HTTP web server.
The http server transfers a dynamically built web site that shows the recent
configuration of the Ethernet coupler.
Besides of the firmware version and RDY/ERR-LED state, the I/O states
and the parameters of the modules are shown.
The website also gives you the opportunity to send your alterations online,
like accessing module outputs, change the parameters and initialize a re-
boot of the Ethernet coupler.
OPC server for data transfer between coupler and PC
The access happens via the ports 7779 and 7780 on the Siemens S5
Header Server. Via these ports, fetch and write accesses via the VIPA
OPC server are enabled.
The VIPA OPC server is a comfortable tool for visualization and data
transfer.
Access from
PC