VIPA System 200V IM Series, Руководство пользователя

Страница: 298 / 348

Chapter 7 SERCOS - Spare part
Manual VIPA System 200V
7-16 HB97E - IM - Rev. 06/29
...
continue
S-3-0050 6.0.DIGITAL_BYTE.OUT Module in position 6
Inside the module at Byte offset 0
A digital Byte
Output
S-3-0060 7.0.DIGITAL_DOUBLE.OUT Module in position 7
Inside the module at Byte offset 0
A digital double word
Output
S-3-0070 9.0.DIGITAL_DOUBLE.OUT Module in position 9
Inside the module at Byte offset 0
A digital double word
Output
S-3-0080 9.4.DIGITAL_DOUBLE.OUT Module in position 9
Inside the module at Byte offset 4
A digital double word
Output
S-3-0090 9.8.DIGITAL_BYTE.OUT Module in position 9
Inside the module at Byte offset 8
A digital Byte
Output
S-3-0100 9.9.DIGITAL_BYTE.OUT Module in position 9
Inside the module at Byte offset 9
A digital Byte
Output
P-0-Identifier (Parameter) always present
P-0-0000 WRITE_PARAMETER Set here the init for read/write all parameters:
1=Write, 2=Clear
P-0-0001 Estimated SERCOS cycle time Value here: 1460 Micro seconds
i.e. you may run this assembly with 2ms
SERCOS cycle.