VIPA System 200V IM Series, Руководство пользователя

Страница: 271 / 348

Manual VIPA System 200V
Chapter 6 DeviceNet
HB97E - IM - Rev. 06/29 6-11
Module configuration in the DeviceNet-Manager
The System 200V includes configurable modules like analog modules.
When you are using these modules in conjunction with a DeviceNet
coupler the respective parameters have to be saved in the DeviceNet
coupler.
The following conditions apply to the configuration:
•
DeviceNet manages the parameter data in groups.
•
Every DeviceNet coupler is able to process and store a maximum of
144Byte of parameter data.
•
These 144Byte are divided into 8 groups of 18Byte each.
•
Every group can contain the parameter data of 1 module.
•
Groups are identified by a prefix-No. (1...8) in the parameter name.
•
The number of parameter bytes is defined in the parameter "Len" (1
st
parameter) of a group. The number of parameter bytes is available from
the technical data contained in the documentation on the peripheral
modules.
•
The group allocation for a module does not depend on the location or
the installation sequence.
•
The allocation of the plug-in location is defined by means of the "Slot"-
parameter of a group (2
nd
parameter)
•
The values may be entered as bit patterns by double-clicking a
parameter
•
Unused groups are identified by a "Value" 0000 0000.
Precondition: The IM 253DN coupler is active on the bus.
Below follows a description of how the parameter settings are defined in
the
DeviceNet-Manager
.
•
Execute the function WHO in the
DeviceNet-Manager
.
This will open a network window that includes your coupler.
•
Double-click the icon of the bus coupler where you want to modify the
parameter data.
The parameters are read from the coupler and displayed in the following
window:
Configuration in
groups
Approach