Vigilantplant TDLS8000, Руководство пользователя

Страница: 299 / 320

<Appendix 8 Explosion Protected Type Instrument>
App.8-30
IM 11Y01D01-01EN
l
YH8000-S2 (ATEX Declaration)
(1) Technical Data
• Applicable standards
EN 60079-0: 2012+A11:2013
EN 60079-11: 2012
EN 60079-15: 2010
• Ratings
II 3 G Ex nA ic IIC T5 Gc
• Enclosure
IP65 (In accordance with EN 60529)
• Specific condition of use
Precautions shall be taken to minimize the risk from electrostatic discharge of painted parts
and non-metallic parts of the enclosure.
(2) Name Plate
(3) Installation
• The installation of the equipment should be carried out by the engineers or other
professional personnel of the related expertise. The installation should not be carried out by
operators or other unprofessional personnel.
• The installation must be in accordance with EN 60079-14 and relevant local codes.
• The equipment must only be used in an area of not more than pollution degree 2, as defined
in IEC 60664-1.
• When the cable glands and/or adapters are used, they must be Ex “d”, Ex “e”, or Ex “n”
type, and must also meet the ingress protection requirement of IP54 or more. If YH8000 is
installed in where more than IP54 is required as ingress protection, the cable gland and/or
adapters should be meet the requirement.
• The thread type of the cable entries shall be confirmed according to the user’s manual.
• Screws of the field wiring terminals must be tightened with the specified torque value: 0.22
to 0.25 Nm.
• Field wiring for ethernet communication must be in accordance with IEEE 802.3 so as to
avoid overvoltage of > 119 V.
WARNING
- DO NOT OPEN WHEN AN EXPLOSIVE ATMOSPHERE MAY BE PRESENT
- POTENTIAL ELECTROSTATIC CHARGING HAZARD
- FOR INSTALLATION AND SAFE USE, READ IM11Y01D01-01
3rd Edition: Jun. 10, 2016-00