Vigilantplant TDLS8000, Руководство пользователя

Страница: 240 / 320

<Appendix 1 Constructing Unit Connection Cables>
App.1-1
IM 11Y01D01-01EN
Appendix 1 Constructing Unit
Connection Cables
Use the cables of other selling to connect between the sensor control unit (SCU) and the laser
unit (LU). This section explains how to terminate this cable.
NOTE
To maintain the TDLS8000 performance and functionality, be sure to use the cables of other
selling.
l
Required components and tools
• Wire cutter
• Wire stripper
•
Round crimp-on terminals (for M4 screws, nominal cross sectional area of wire 5.5 mm
2
), 2 pcs.
FV5.5-S4 by J.S.T. Mfg. Co.,Ltd. or 324915 by TE Connectivity, or equivalent
• Crimp tool for round crimp-on terminals
• Heat shrink tubes
Inner diameter 6 mm, length approx. 110 mm, 2 pcs.
Inner diameter 16 mm, length approx. 50 mm, 2 pcs.
• Heating gun (for shrinking heat shrink tubes)
l
Cable specifications
• Manufacturer and model Belden 1475A
• Number of pairs 4 pairs (cover colors, black and white)
Pair numbers are indicated on the cover of each wire (ONE, TWO,
THREE, FOUR)
• Shield Shield for each pair and shield for the whole cable
• Wire diameter AWG18
• Cable outer diameter Approx. ø12 mm
• Flame resistance FT4
• Operating temperature range -30°C to +105°C
• Usage environment Indoor/outdoor
For detailed cable specifications, visit the Belden website.
Select cables with the appropriate length from “2.2.5 Unit Connection Cable” according to the
TDLS8000 installation conditions and adjust the length if necessary.
3rd Edition: Jun. 10, 2016-00