Vigilantplant TDLS8000, Руководство пользователя

Страница: 237 / 320

<11. Modbus>
11-6
IM 11Y01D01-01EN
11.4 Hold register
Name Address Setting details
Valve stream setting 40001 Sets the current stream
0: Stream 1
1: Stream 2
2: Stream 3
*: Note that via Modbus, exclusion check on the writing of the
current stream according to the valve usage setting is not
performed. For details on exclusion, see “6.8.2 Valve Usage
Setting”.
*: Writing is not possible when maintenance is in progress.
Temperature input
value
40101, 40102 Temperature input value via Modbus, IEEE754 float format (*1)
The unit follows to the temperature unit setting.
*: Writing is possible even when maintenance is in progress.
Pressure input value 40103, 40104 Pressure input value via Modbus, IEEE754 float format (*1)
The unit follows to the pressure unit setting.
*: Writing is possible even when maintenance is in progress.
Time setting (year) 40201 RTC setting date/time (year) based on 2000 (2015 is expressed
as 15) (*2) (*3)
Time setting (month) 40202 RTC setting date/time (month) 1 to 12 (*2) (*3)
Time setting (day) 40203 RTC setting date/time (day) 1 to 31 (*2) (*3)
Time setting (hour) 40204 RTC setting time (hour) 0 to 23 (*2)
Time setting (minute) 40205 RTC setting time (minute) 0 to 59 (*2)
Time setting (second) 40206 RTC setting time (second) 0 to 59 (*2)
*1: IEEE754 float format (in 2 registers, In the order upper 16 bits and then lower 16 bits)
Write the both upper and lower bits together.
*2: Apply the settings using the coil “time setting instruction”.
*3: Write the year, month, and day in order from the highest address.
NOTE
When inputting the temperature value or pressure value via Modbus, set the input unit the same
as the TDLS8000 unit. If input using a different unit, the concentration reading will not be output
correctly.
3rd Edition: Jun. 10, 2016-00