Vigilantplant TDLS8000, Руководство пользователя

Страница: 242 / 320

<Appendix 1 Constructing Unit Connection Cables>
App.1-3
IM 11Y01D01-01EN
Outer covering
Cover with a heat shrink tube.
Heat shrink tube
About 110 mm
Expose about 10 mm of the end of
the ground wires.
Overlap from the outside cover
About 20 mm
Heat shrink tube
About 50 mm
Cover with a heat shrink tube.
Covering with heat shrink tubes
(6) Attach a round crimp-on terminal (for M4 screws, nominal cross sectional area of wire 5.5
mm
2
) to the end of the bundled ground wires.
Outer covering
Attach a round crimp-on terminal
to the ground wires.
Attach a round crimp-on terminal to the end of the ground wires
(7) Strip about 7 mm of covering from the ends of each twisted-pair.
Outer covering
Remove about 7 mm of the covering.
Removing the covering from the ends of each twisted-pair
The ends of the twisted-pair cables can be screwed on to the terminal block without the covering.
To crimp a pin terminal to the ends of twisted-pairs, use the following recommended product or
equivalent.
Connection wire size: 0.75 mm
2
(AWG18)
Recommended product: Weidmüeller H 0.75/12
This completes the cable termination procedure.
3rd Edition: Jun. 10, 2016-00