Vicruns VD500 Series, Инструкция по эксплуатации

Страница: 168 / 216

Parameter Description VD500 Series Inverter User Manual
- 164 -
FC Multi-reference and Simple PLC Parameters Group
FC-00 Multi-reference 0 -100.0%~100.0% 0.0%
○
FC-01 Multi-reference 1 -100.0%~100.0% 0.0%
○
FC-02 Multi-reference 2 -100.0%~100.0% 0.0%
○
FC-03 Multi-reference 3 -100.0%~100.0% 0.0%
○
FC-04 Multi-reference 4 -100.0%~100.0% 0.0%
○
FC-05 Multi-reference 5 -100.0%~100.0% 0.0%
○
FC-06 Multi-reference 6 -100.0%~100.0% 0.0%
○
FC-07 Multi-reference 7 -100.0%~100.0% 0.0%
○
FC-08 Multi-reference 8 -100.0%~100.0% 0.0%
○
FC-09 Multi-reference 9 -100.0%~100.0% 0.0%
○
FC-10 Multi-reference 10 -100.0%~100.0% 0.0%
○
FC-11 Multi-reference 11 -100.0%~100.0% 0.0%
○
FC-12 Multi-reference 12 -100.0%~100.0% 0.0%
○
FC-13 Multi-reference 13 -100.0%~100.0% 0.0%
○
FC-14 Multi-reference 14 -100.0%~100.0% 0.0%
○
FC-15 Multi-reference 15 -100.0%~100.0% 0.0%
○
Multi-reference can be used in three occasions: as the frequency source, the voltage source of V/F
separation and the set source of process PID.
Under three kinds of applications, the dimension of the multi reference is relative value, the range of
-100.0%~100.0%, when as the frequency source it is relative to the percentage of the maximum
frequency; when as the V/F separation voltage source, is relative to the percentage of the rated motor
voltage; and because PID is given as a relative value, the multi-reference as set source of PID don't
need a dimensional transformation.