dPMR Signal Rx Meter Remote Commands
4 - 23
4.10.4
Symbol Deviation - Lower Limit Value
:LIMits:SYMdev:CH1:LOWer:VALue
:LIMits:SYMdev:CH1:LOWer:VALue?
4.10.5
Symbol Deviation - Measurement Query
:METERs:SYMdev:CH1:STATus?
4.10.6
Symbol Deviation - Peak Measurement Reset
:METERs:SYMdev:CH1:CLEAR:PEAK
4.10.7
Symbol Deviation - Upper Limit Enable
:LIMits:SYMdev:CH1:UPPer:ENABle
:LIMits:SYMdev:CH1:UPPer:ENABle?
Description:
Set command defines Lower Limit Value for Symbol Deviation measurement.
Query command returns parameter setting.
Range:
0.0 to 10,000.0 Hz
Units:
Hz
Default Value:
0.0 Hz
Set/Query Format:
NRf | NR2
Example:
:LIMits:SYMdev:CH1:LOWer:VALue 250Hz
Sets Lower Limit Value for Symbol Deviation measurement to 250.0 Hz.
Query Response:
:LIMits:SYMdev:CH1:LOWer:VALue?
250.00
Description:
Command returns Symbol Deviation measurement data.
Query Data:
<statusbyte>,<failbyte>,<precision>,<percentage>,<avg>,<max>,<min>,<units>
Refer to Chapter 1 for UUT Measurement Meter return data.
Query Response:
:METERs:SYMdev:CH1:STATus?
0,0,2,100.000,1946.569,2046.316,1800.000,2
Description:
Command clears and resets Peak Symbol Deviation measurement.
Parameter/Query:
none
Description:
Set command Enables/Disables Upper Limit for Symbol Deviation measurement.
Query command returns parameter setting.
Parameter:
OFF | ON | 0 | 1
Default Value:
OFF
Set/Query Format:
Boolean
Example:
:LIMits:SYMdev:CH1:UPPer:ENABle ON
Enables Upper Limit for Symbol Deviation measurement.
Query Response:
:LIMits:SYMdev:CH1:UPPer:ENABle?
1
N O T E
Содержание 3900 Series
