Vertiv SmartRow DCR, Инструкция по установке и эксплуатации

Страница: 7 / 102

1 IMPORTANT SAFETY INSTRUCTIONS
Save These Instructions
This manual contains important instructions that must be closely followed during installation of this unit
to maintain compliance with agency listings. Read all safety and operating instructions before attempting
to operate the SmartRow DCR. Adhere to all warnings on the unit and in this manual. Follow all operating
and user instructions.
This product is designed for commercial / industrial use only. This product is not intended for use with life
support or other U.S. FDA designated “critical” devices. Maximum loads must not exceed those specified in
this manual.
Install in a clean environment, free from moisture, flammable liquids, gases and corrosive substances.
Operate this product in an indoor environment at an ambient temperature between 35°F and 85°F (1.6°C
to 29°C). Additionally, units using a remote condenser must be operated at outdoor ambient
temperatures of:
• MC condensers—above 0°F (18°C)
• Liebert Lee-Temp
™
condensers—above -20°F (-29°C)
This product must be connected to and powered by suitable AC supplies, rated in accordance with the
unit’s serial tag. It must be properly grounded and protected by circuit breakers or fuses.
The SmartRowDCR must be installed on a flat, level surface for proper assembly and operation.
We recommend using shielded cables for all external communication interfaces.
Ensure that the SmartRow DCR has proper ventilation. Never block or insert objects into the ventilation
holes or other openings. Maintain minimum clearances as specified in this manual (see
Clearance
Requirements on page 13 and Unit Dimensions, Weights, and Wiring Tables on page 78).
WARNING! Risk of handling heavy unit. Can cause equipment damage, injury or death. Read all
instruction before beginning.
WARNING! Risk of top-heavy unit falling over. Improper handling can cause equipment
damage, injury or death. Only properly trained and qualified personnel wearing appropriate
safety headgear, gloves, shoes and glasses should attempt to move, lift, remove packaging
from or prepare unit for installation. Read all instructions before attempting to move, lift,
remove packaging from or preparing unit for installation.
Vertiv | SmartRow DCR Installer/User Guide | 7