Vertiv SmartRow DCR, Инструкция по установке и эксплуатации

Страница: 77 / 102

11 MAINTENANCE
11.1 Liebert PDX/PCW Maintenance
Proper application and maintenance of the entire DCR-integrated PDX/PCW is critical to the life and
reliability of the system. See appropriate sections for maintenance in the Liebert PDX and PCW Thermal
Management Systems User Manual for recommended procedures and timing of Preventative
maintenance on your thermal-management units.
11.2 Fire Detection and Suppression System Maintenance
Periodic maintenance, replacement and testing shall be, as a minimum, performed per NFPA 72.
Maintenance shall be performed by a trained or authorized Fike representative.
Make sure that you consistently check the cylinder to ensure it remains properly charged. The cylinder
gauge must be in the green area. If it is not, be sure to contact your local trained or authorized Fike
representative.
See section 6.0 in the SHP Pro Product Manual that comes with your system for further detail on proper
Fire Suppression System Maintenance.
11.3 UPSs and Rack PDUs Maintenance
Refer to your system’s UPS manual for recommended maintenance procedures and timing. Contact
Vertiv™ at 800-543-2378 for information about availability of optional preventative-maintenance plans.
Vertiv | SmartRow DCR Installer/User Guide | 77