Vertiv SmartRow DCR, Инструкция по установке и эксплуатации

Страница: 69 / 102

Figure 8.1 Separately-shipped Fire-suppression kit
8.2.1 DCR Fire Suppression Commissioning Procedure
Do not call to have the Fire Suppression system commissioned until all of the items in Cooling and Power
Component Installation Checklist on page 67, and Fire Suppression System Installation Checklist on the
previous page, have been completed.
The local company arming the fire-suppression system cannot turn the system On until all the items
above have been completed, and the "Fire Suppression System Installation Checklist" has been signed by
the representative and the customer. Scheduling the local distributor prior to these items being
completed may result in additional charges.
After the tasks have been completed, a local qualified service representative will conduct final fire-
suppression system commissioning and arming.
1. Reach out to Flagship Fire inc. at 941-723-7320 and request help to arrange a day and time for
a local fire rep. to come out to charge, start up and commission the fire-suppression system.
The representative will also walk through any special jurisdictional requirements for the project
that may require additional paperwork and possibly fees.
2. When the local agent arrives on site, the dry agent tank will be charged and the system will be
started and commissioned.
3. If you want the system to be put through any specific testing, a Vertiv™ technician is required
to be on-site to oversee the cooling unit, UPS and other Vertiv™ equipment. This is explained
during the initial phone call referenced in step 1.
Vertiv | SmartRow DCR Installer/User Guide | 69