Vari RAPTOR Hydro, Инструкция по эксплуатации

Страница: 55 / 100

RAPTOR Hydro
Fig. 1: Machine packaging The point for supporting the machine
1) Upper chassis
2) Bottom chassis with the bumper and the hitch
3) Handlebars support post with the integrated fuel
tank
4) Handlebars
5) Tightening nut for vertical adjustment of the
handlebars
6) Handlebars horizontal adjustment pin
7) Engine
8) Three-way fuel valve
9) Fuel tank cap with the bleeder
10) K46ED hydrostatic gearbox
11) Left wheel
12) Right wheel
13) Travel clutch lever
14) Attachment drive clutch lever
15) Safety lock
16) Service brake lever
17) Throttle levers
18) Speed selector lever
19) Scale and arrow
20) Bypass lever (OFF-ON)
21) Front attachment point
22) Rear attachment point
23) Attachment drive belt pulley
Fig. 2: Description of the machine
Fig. 3: Vertical adjustment of the handlebars
Fig. 4: Horizontal adjustment of the handlebars
Fig. 5: Switching between the Manual and Motorized
Travel
ON position – engine-driven travel OFF position – manual travel
Fig. 6: Control elements on handlebars
Fig. 7: Travel Speed Selection Forward Neutral Reverse
1) STOP:
The engine is not running.
➢
It is used to turn off the running engine,
➢
when the machine is parked,
➢
when refuelling,
➢
when transporting the machine.
2) MIN:
“Turtle” position
The engine runs at its idle speed.
➢
Short work break.
3) MAX:
“Rabbit” position
The engine runs at its maximum speed.
➢
Working position
➢
Cold start of the B&S engines
Fig. 8: Accelerator lever positions
Fuel system
1) Three-way valve that allows to close the supply of fuel to the engine
2) Auxiliary fuel tank 4.5 litres
3) Engine fuel tank 1.1 litre
4) Fuel tank cap with the bleeder
5) Fuel filter integrated in the fuel hose.
1 The arrow points to the right, marked with OFF – the fuel system is
completely closed
2 The arrow points upwards, engine silhouette – the engine uses the fuel
from the engine tank
3 The arrow points downwards, auxiliary tank silhouette – the engine uses the
fuel from the auxiliary tank
Fig. 9: Fuel system Maximum level of fuel
The Z-02 pin is not included in the supply of the RAPTOR Hydro carrier; it is necessary to separately purchase it as accessories under the ordering No:
121001 .
Fig. 10: Attaching the Tools to the Rear of the
Machine ANV-200 trailer AV-650 sulky
Fig. 11: Bowden adjustment screws
Fig. 12: Attachment tool drive clutch lever – setting
Fig. 13: Travel clutch lever – setting
Fig. 14: Safety Pictograms
Spark plug spanner 21 mm (3/8“) Ratchet handle 3/8“ 12-point socket – 3/8“ - 15 mm
12-point socket – 3/8“ - 17 mm
HONDA petrol can
Ordering No. 4359 HONDA fuel stabilizer
Ordering No. 08CXZ-FSC-250 Briggs & Stratton Fuel Fit™ fuel stabilizer (Ordering
No. 992381)
VARI POWERMETER operating hours counter
Ordering No. 4227
JANETTE Type (150 ml) rinse syringe - for sucking
out the oil
Z-01 pin
Ordering No. 121001
Fig. 15: Recommended Tools and Accessories
55
re
vi
ze
1
1/
20
17