Floor Screed Machine HD 50
32
www.utiform.com
departamento.té[email protected]
Tfno. + 34 96 570 29 82 Fax: + 34 96 570 29 83
Cause 2
: The brake linings have not been used enough
Braking several times will resolve the problem
Cause 3
: The brake linings are damaged
Renew the brake shoes
Cause 4:
Too much loss of friction in the mechanical action of
the brakes. Problem: corrosion in the traction bar.
Check the mechanical action in a specialized
workshop to ensure that they work easily.
** Difficulties in reversing:
Problem
Solution
The braking equipment has been too rigidly regulated Readjust the brake system in a specialized workshop
** Overheated brakes:
Problem
Solution
The brake system is incorrectly regulated Readjust the brake system in a specialized workshop
7.13 Winter
operation
In areas with low temperatures it is more difficult to work.
Make the most of this time if possible to carry out maintenance and repair work on the machine.
Carry out any annual service at an authorized workshop.
Operation without difficulties is guaranteed to 0 ºC. If the temperature goes below freezing point
bear in mind the following points:
•
Prepare the workplace and the material accordingly and transport in an adequate manner.
•
Do not use frozen material
Preparation of the machine:
•
Use fuel with special additives for low temperatures
•
Use motor oil with a viscosity suitable for outdoor temperature.
•
In extreme temperatures it is advisable to dismantle the battery and keep it in a warm place.
•
In batteries which require maintenance, ensure that the acid level is adequate.
8
Compressor
8.1
General Description
The HD-50/07an asymmetric rotary air compressor with lubrication, portable and single sampling for an
effective working pressure of 7 bar.
It is air-cooled, with a cooler which is perfectly adapted to the compressor to provide optimum performance
and energy saving. This motor compressor is sound proofed, which means it can be used in the workplace in the
vicinity of personnel, due to the low noise levels.
The motor compressor system is supported by anti-vibratory supports which also house the diesel tank,
battery and cooling unit.
