Floor Screed Machine HD 50
46
www.utiform.com
departamento.té[email protected]
Tfno. + 34 96 570 29 82 Fax: + 34 96 570 29 83
9.10.6.1. - Cleaning instructions.
Cleaning should be done daily and even more frequently if the work conditions are very dusty.
Never start the engine of the machine without air filter. Do not continue to have the machine in
operation with damaged air filters.
Before the assembly, it is necessary to verify that the new units do not show cracks or holes.
If the unit (4) is damaged, discard it.
If the cartridge security (3) is dirty, that means that the filter unit is malfunctioning.
9.10.7 Air-oil
filter
separator
This element, which is extremely important to ensure air with almost no oil and practically no lubricant
consumption, consists of a layer of micro fine fiberglass protected by a sheet of perforated steel which catches
the drops of oil which then coagulate through gravity, obtaining in good conditions high efficiency and ensuring
a residual oil content in liquid phase of 2 to 3 p.p.m. (parts per million) equivalent to 2 to 3 mg (oil)/Nm
3
(air).
The oil separated by the filter separator is recovered though the LOW GRAIN SIZE MATERIAL
OUTLET and injected once more into the compressor.
Below see the illustration of the air-oil separator filter which comes with this unit.